29) Question / Partitions: Implantation walls, draw level
Hello
Thanks for your valuable advice and availability.
We just make the whole installation of the ceiling (BA13 + + suspsente
fur) and the peripheral frame walls and I was wondering
question of how to implement the parts in the most
fair as possible.
I do not have a laser and do not wish to acquire.
If you have any tips or solutions to achieve this in the most accurate
, thank you in advance for you.
Which
surface and begin implementing the measure - tracing?
floor or ceiling? How
reporter accurately as it got to one side?
+ Level rule?
The plumb line is it reliable? (I can not use it
accurate)
How to make perpendicular to a wall?
again thank you. Good day
A + +
29) Answer / Partitions: Implantation walls, draw level
Bj: You made the ceiling, you did the dubbing placostil structure and you want to establish the partitions. If you have already made the structure of dubbing is that you have to trace and plumb it all, so you can venture to draw a wall and plumb.
To draw you must start with the easiest, down. You draw in your CORDEX partition and place the bottom rail. Done like this all your flat or level. Then you made the implementation of the top referring to plumb your ceiling structure. No need to draw any ceiling. Just bring the point: the beginning, middle and end of the partition and you aim your ceiling track. The difference with the top down and bottom that you stop at the door and up you go straight to the end filler.
Be careful: once you draw up the rails to the right side of face. Tip: Draw a line like this: I < href="http://placo.blogspot.com/2006/12/27question-cloisons-comment-faire-pour.html#links"> http://placo.blogspot.com/2006/12/27question-cloisons-comment-faire-
Here you can get an idea of how to "seal" a partition. The plumb and level when on. The level you drop it once and it is wrong afterwards. Even if you think it is more about prehistoric. Let's square portion is perpendicular to the rail, it is necessary that the party cone - truncated - rotates freely barely touching the bottom rail. To draw a perpendicular to it if you do not have a large square, you can guide you through the proportion of width to 60cm from point A to point B - 80cm length - from point A to point C, and 100cm right will link them when they are at 90 ° from one another - the point B to point C. All this makes a triangle with an angle of 90 degrees. You can use the steps 120, 160, 200 and so on to have a great imaginary square.
A + Jorge
Hello
Thanks for your valuable advice and availability.
We just make the whole installation of the ceiling (BA13 + + suspsente
fur) and the peripheral frame walls and I was wondering
question of how to implement the parts in the most
fair as possible.
I do not have a laser and do not wish to acquire.
If you have any tips or solutions to achieve this in the most accurate
, thank you in advance for you.
Which
surface and begin implementing the measure - tracing?
floor or ceiling? How
reporter accurately as it got to one side?
+ Level rule?
The plumb line is it reliable? (I can not use it
accurate)
How to make perpendicular to a wall?
again thank you. Good day
A + +
29) Answer / Partitions: Implantation walls, draw level
Bj: You made the ceiling, you did the dubbing placostil structure and you want to establish the partitions. If you have already made the structure of dubbing is that you have to trace and plumb it all, so you can venture to draw a wall and plumb.
To draw you must start with the easiest, down. You draw in your CORDEX partition and place the bottom rail. Done like this all your flat or level. Then you made the implementation of the top referring to plumb your ceiling structure. No need to draw any ceiling. Just bring the point: the beginning, middle and end of the partition and you aim your ceiling track. The difference with the top down and bottom that you stop at the door and up you go straight to the end filler.
Be careful: once you draw up the rails to the right side of face. Tip: Draw a line like this: I < href="http://placo.blogspot.com/2006/12/27question-cloisons-comment-faire-pour.html#links"> http://placo.blogspot.com/2006/12/27question-cloisons-comment-faire-
Here you can get an idea of how to "seal" a partition. The plumb and level when on. The level you drop it once and it is wrong afterwards. Even if you think it is more about prehistoric. Let's square portion is perpendicular to the rail, it is necessary that the party cone - truncated - rotates freely barely touching the bottom rail. To draw a perpendicular to it if you do not have a large square, you can guide you through the proportion of width to 60cm from point A to point B - 80cm length - from point A to point C, and 100cm right will link them when they are at 90 ° from one another - the point B to point C. All this makes a triangle with an angle of 90 degrees. You can use the steps 120, 160, 200 and so on to have a great imaginary square.
A + Jorge
0 comments:
Post a Comment